Chat
Sanding pad protectors will help to prevent premature wear on your sanding pad. Continuous and aggressive sanding with Abranet can sometimes be hard on sanding pads since dust and debris can migrate freely through the abrasive discs. To remedy this, the protector is positioned between the backing pad and the sanding disc to provide cushioning and protection.
The interface pad is used in combination with hook & loop sanding discs for sanding surfaces and contours, with Mirka's net products. Using the multi interface pad will also produce a softer result. The multi Interface pad is placed between the backing pad and the sanding disc.
Mirka's pad savers are designed to protect the backing pad from wear and tear, when sanding aggressively and continuously with net products. These cost effective pad savers, placed between the backing pad and the sanding disc, should be changed regulary. The pad savers prolong the life of the backing pad.
Match the pad saver hole pattern to the backing pad by locating the matching holes on the pad saver to the locating spots on the backing pad.
Apply and press the pad saver firmly to the backing pad. Fasten the abrasive to the pad saver.
Place the sander on the object to be sanded and then start the sanding machine.
- Prolongs the life of your sanding pad
- Hook-and-loop on one side, Grip on the other—just place between the sanding pad and the abrasive disc
- Low cost and easily replaced
- Helps to improve dust collection through Abranet mesh